(c) Copyright 2001 Motorola. All Rights Reserved.
MWDriver Package 7.0.0.4 Manual Installation

Last update: 6 June 2001

This file is divided into three sections:
     I. General Information 
    II. Installation Procedure
   III. Technical Support.

I. General Information:
=======================

This file describes the procedure for manually installing of the MW520 Hardware Driver.  Please refer to the "README.TXT" in the root directory of this media for general product notes and for initial installation instructions.
The folder "MWDriver Package" contains  files for full installation of the MW-520 hardware driver. The purpose of this folder is a manual update of the MW-520 hardware driver in case of failure of the automatic installation.
The hardware driver include three major files: mwevnt.sys, hwevnt32.dll and mwserv.exe.  

II. Installation Procedure:
=======================

To manually install the MW-520 hardware driver, use the standard Windows(C) Hardware Update Procedure. The steps are as following:  
1.Right-click on "My Computer" and choose the option "Properties" in the pop-up menu. 
2.Select the "Hardware" tab and then push the button "Hardware Wizard...". 
3. The "Add/Remove Hardware Wizard" should open. Click "Next>" and then "Next>" again. 
4. When the Wizard has finished searching for new Plug and Play hardware to install, choose "Add a new device" and click "Next>". 
5. Choose "No, I want to select the hardware from a list" and click "Next>". 
6. If there is the hardware type "MW520 Drivers", choose it, otherwise choose  "Other devices".  Click "Next>". 
7. In the section "Select a Device Driver" click the button "Have Disk...". 
8. Locate the file mwevnt.inf in the current folder and click "OK". Click "Next>". 
9. If you get the message box "Windows could not detect the settings of the device...",  click "OK". 
10. In the "Resources" property page be sure to check that resources allocated by the driver have no conflicts. If there are conflicting resources, you must first enter the   Device Manager and disable/uninstall the devices that hold these resources. Click "OK" button. 
11. When you get the message box "You adjusted one or more resources manually...", click "OK", and then click "Next>". 
12. Click "Finish" to close the Wizard. 
13. Click "Yes" to restart the computer. 

III. Technical Support
=======================

Motorola System Support Center:

If additional information is required, please use the following phone number: (800) 221-7144.

Before contacting for assistance please have the following information ready:
   - All messages displayed on the screen;
   - System version and configuration files.

If additional information is required about MW-520's, please refer to http://mw520.motorola.com
 For the latest software drivers and other file updates, please refer to the software page at: ftp://mw520.motorola.com (use "anonymous" login).
< End of file >
